DynaVap VapCap M

The DynaVap m is the most popular battery-free dry herb vaporizer and comes with huge advantages such as not containing any electronic parts so you don’t have to worry about electronic parts failing. The dynavap vapcap gives you the freedom you need to vaporizer all day long anywhere, without needing anything other than a butane torch or induction heater while maximizing flavor.

The DynaVap vaporizer can be used with dry herbs and concentrates (DynaCoil adaptor needed). DynaVap M heats your plant material at a lower temperature which produces thick, consistent, and extremely flavorful, providing a unique vaping experience.

How to use Dynavap M:

Read the instruction manual and do 2 to 4 runs with nothing in the vapcap to become familiar with the device. The vapcap indicates it has reached the right temperature with a click so heat the vapcap in a quiet area and listen for the click. You should hear the click after 5 to 6 second of heating with a torch. Make sure to heat the middle of the cap and rotate it while heating.

Repeat this process for 2 to 4 times as mentioned above. Allow the vapcap to cool down and then remove the cap, fill the chamber with your herb of choice and palace the cap back. Now heat the vapcap while rotating it until you hear or feel the click. Then puff on the vapcap and keep drawing vapor until you hear the click again. This click indicates that the device has cooled down. After the vapcap has cooled down completely (takes around 1 minute), blow out the end to remove the vaporized herb, reload and enjoy!

What’s in the box:

• DynaVap vaporizer
• Recyclable packaging

Cleaning and maintenance recommendations:

In order to clean your dynavap m, the first step is to remove the dry herb material from the chamber. You can do this by either blowing on the mouthpiece or by using the built-in extractor to empty the herb chamber. Then the dynavap vaporizer can be cleaned with hot water or you can use the carrying case to do so. In this case, fill the carrying case half full with a cleaning solution or, let soak for a couple of minutes and shake to clean the dynavap vaporizer. Keep in mind that the cap should be removed.

Remember that cleaning with alcohol or other flammable liquids will not damage your dynavap m but it’s not recommended!