Arizer Solo 2

The Arizer Solo 2 is the ideal vape for those who are looking for a top quality device that’s easy to carry and features an array of top-notch features. Thanks to the outstanding battery, the arizer solo 2 provides up to 3 hours of vaping with one single charge, making it the perfect device for home and on-the-go use.

Thanks to the unique glass air path, the device offers delicious vapor without any metallic tastes, providing users a completely safe and smooth vape session. With a heat up time of 30 seconds and a fully adjustable temperature range, the arizer solo 2 is the perfect choice for vape lovers.

How to use Arizer Solo 2:

Turn on the arizer solo 2 by pressing the UP and DOWN button for 1-2 seconds. The device will beep and begin to heat. If you prefer not hearing the beep, you can turn it off (or on) by turning the device on and holding down the UP button for three seconds. The arizer solo 2 comes with two different tubes, The first time using it you’ll notice that the tubes don’t fit, but don’t worry, this is because the vaporizer is brand new and you need to break in the seal.

So go ahead and heat up the arizer solo 2 to the maximum temperature, then take the tube and insert it into the seal (you only need to do this once). Remember that the tube fitting too loose or snugly does not affect your vaping experience. After doing so, remove the tube and allow the unit to cool down. After finishing with the process mentioned above, go ahead and select one of the arizer solo 2 temperatures below:

Setting 1 -  50 ºC (122 ºF)

Setting 2 - 185 ºC (365 ºF)

Setting 3 - 190 ºC (374 ºF)

Setting 4 - 195 ºC (383 ºF)

Setting 5 - 200 ºC (392 ºF)

Setting 6 - 205 ºC (401 ºF)

Setting 7 - 210 ºC (410 ºF)

Remember that the right temperature depends on your personal preference. Keep in mind that higher temperatures produce thicker vapour while lower temperatures produce lighter vapor. 

Now grab one of the dry herb tubes and fill it with your ground herb, make sure to not grind the herb too finely to prevent it from falling through the tube. Also, do NOT pack the glass tube too tightly to allow for better airflow. Now set the device to the desired temperature and turn on the device. Once the device is turned ON, wait a couple of minutes until it heats up and inhale slowly in order tomantain a good vapor temperature. Experiment with different temperatures to find the best temperature setting for you.

Once you’ve finished your vape session, turn the arizer solo 2 and turn the device upside down to pull out the glass tube. Keep in mind that the glass tub will be hot so it’s highly recommended to wait until the device has cooled down. It’s recommended to clean the glass tube right after use to prevent residue build up so grab a pipe cleaner or a Q-Tip to remove the used dry herb, and place the glass tube on a silicone ashtray or similar product to prevent the tube from breaking.

What’s in the box:

• Arizer Solo 2 vaporizer
• Glass dish
• Carrying case
• Stirring tool
• Charger
• Glass tubes 
• Silicone tube covers
• Arizer Solo 2 Accessories
• Replacement screens
• Instruction manual

Cleaning and maintenance recommendations:

Cleaning this device is extremely easy, all you have to do is clean the arizer solo mouthpieces by soaking them in alcohol and rinsing them with hot water. Then let dry. If your device is not completely clean, you can use cotton soaked in alcohol to remove the residue left. If you’re using accessories such as the arizer solo 2 bubbler and special arizer solo mouthpieces, make sure to also clean them with alcohol.