Best LED Lights for Growing in Small Spaces

• 1. Led vs light bulbs
• 2. Photosynthetically active radiation (par)
• 3. Photosynthetic photon flux density (ppfd)
• 4. Recommended ppfd for autoflowers
• 5. Light efficiency
• 6. The best led grow lights for small spaces
• 7. In conclusion

If you’re a new grower or are looking to update your light fixture for your 60x60cm space, you’ll see that there aren’t as many choices as you’d like; There are a lot of “blurple” LEDs that aren’t actually very good or claim to be something they’re not, this is because most companies focus on making LEDs for big commercial operations, leaving feminized seeds growers with limited options. When shopping for an LED, you should look for several characteristics to make sure that it really is what you’re looking for, so to help you decide what light fixture to buy, read along for the best cost-effective lights and what you should look for when shopping for a good-quality LED for small grow spaces.

1. LED vs Light Bulbs

Light bulbs are perhaps the most popular light amongst indoor growers and this has been the case for years and years but for a couple of years now, LEDs have evolved a lot and become extremely popular, and best of all, affordable. Both of these lights will produce very good yields but LEDs have an advantage over bulbs because they don’t emit much heat and are much more efficient which saves you money in the long run. Also, LEDs are built to last at least 50.000 hours or more while bulbs last a maximum of 10.000 hours but the downside is that LEDs go for $100 to $1000 whereas you can find bulbs for as little as $50, so if you’re planning on buying an LED there are a couple of things that you should have in mind, such as the photosynthetically active radiation (PAR), Photosynthetically Active Radiation (PPFD) and light efficiency.

เรื่องที่เกี่ยวข้อง

Indoor lights for Cannabis grow: LED vs Bulbs

Overall, LEDs provide a host of advantages over many other forms of light. These benefits make them one of the most popular lighting options among cannabis cultivators. Compared to HID (high-intensity discharge) lights, they are far more energy efficient. For cannabis growers, this means reduced electricity costs—a factor that can make their hobby much kinder to their bank account. Next up, many models also boast customizable spectrums. Why is this important? Because instead of buying different lights that emit different colored wavelengths, you can simply adjust the settings on a single light. Using a switch or dial, you can change the wavelengths that your light produces depending on the plants you're growing, or the stage of the growing cycle they are currently in. Here’s another benefit to add to the list: lower heat emission. Not only does this add to the overall efficiency of LED lights, but it helps to prevent the phenomenon of heat stress in plants, which occurs when they grow slightly too close for comfort.

2. Photosynthetically Active Radiation (PAR)

When buying an LED, one of the most important things you should look for is the amount of actual light your plants will be able to use and this is where PAR comes in. PAR basically is the wavelengths that plants predominantly use to perform photosynthesis, which ranges in the blue range from 400-500nm and in the red range from 600-700nm; As you may know, plants are green because they don’t actually use the 500-600nm wavelengths so the unused light gets reflected from the leaf and that’s why they appear green to us.

Have in mind that the PAR should not be confused with the spectrum because, when talking about spectrum, you’re referring to all the wavelengths while PAR refers to a certain range of the spectrum that plants need to perform photosynthesis and does not include UVA/UVB and far-red spectrums.

You’ll get even better results if the light fixture you’re planning on buying also emits a little bit of the spectrum outside of the 400-700nm (UVA/UVB and far-red spectrum) because UVA/UVB increases trichome production and far-red increases bud density so when shopping for an LED, you should look for a truly full-spectrum fixture that generates the desired PAR (if possible).

LEDs that emit 400-700nm wavelengths while also emitting the UVA/UVB and far-red spectrums are known as true full-spectrum lights!

But if you cannot find a truly full-spectrum fixture or can’t afford it, don’t worry, as long as the PAR output is good your plants will develop as you’ve never seen before.

Having said that, remember that PAR is not a measurement of the amount of light (or light intensity) rather than the type of light that a certain fixture emits, meaning that a certain LED can emit the wavelengths that plants need but not in the amount or intensity they need, so once you check that the LED fixture will provide the wavelengths that you are looking for (or that your plants need), you will need to focus on the Photosynthetic Photon Flux Density also known as PPFD.

3. Photosynthetic Photon Flux Density (PPFD)

As mentioned above, apart from knowing the type of light your plants will be getting, you also need to know the intensity of the light so the PPFD (which is measured in μmol x m² x second) will tell you exactly how much PAR falls on 1m² in one second. 

The PPFD is extremely important because, even if you are providing the correct PAR, a low PPFD can limit photosynthesis and a high PPFD can end up damaging your plants; This is why, if you’re planning on using a high PPFD, it’s recommended a maximum of 1500-2000 µmol/(m2s) while also optimizing growing conditions which should be around 25-30°C, with a relative humidity level ranging from 60-80% (according to the stage your plants are in) and CO2 concentrations around 750ppm to avoid hurting your plants.

Obviously, if you’re a home gower and are growing in a 60x60cm grow space you won’t need to do any of these because you won’t be providing extremely high PPFD levels, as long as the PPFD stays below 1000 µmol/(m2s) there’s no need to worry but if you want to make sure plant growth is on point we recommend following the conditions shown in the table above as closely as possible, just remember that it isn’t necessary as long as you’re happy with the results you’re getting in your current growing conditions.

4. Recommended PPFD for Autoflowers

For autoflowers, the PPFD requirements are a bit lower. Now, there are some strains that might be more sensitive than others so it’s a matter of experimenting to find the sweet spot, but in general, you can use the following table as a guideline for autoflowers.

If you cannot measure the PPFD, then there are a couple of different ways to make sure your plants are getting enough light, just keep in mind that a PAR meter is the best way to do so as it’s way more precise than the methods we’ll see below. Anyways, if you want to have an idea of how much light you’re providing to your plants enough light, you can download any LUX meter app and use it as a guideline. Remember that the precision of this kind of app depends on how good your smartphone’s camera is but it will help you grow healthier plants and avoid light stress, which can be easy to cause, especially when using modern LED light fixtures.

So how to use LUX meter apps? Actually, it’s really, really easy. All you have to do is download any LUX meter app you can find, preferably, filter out by reviews or downloads, and then just follow the table below in order to see if you’re providing enough light or not.

And again, remember this is just a guideline and may vary according to your light fixture, specific strain, and grow setup. And keep in mind that when injecting CO2 into your grow space, you will have to provide strong lighting as plants will need the extra light in order to effectively absorb CO2.

5. Light Efficiency

In most cases, the light manufacturer specifies the light equivalent to HPS but does not always specify the light efficiency, it’s essential to know exactly how efficient your light is because a higher efficiency means that a light fixture:

• Emits less heat;
• And consumes less power when compared to other LEDs.

To achieve this, the manufacturer has to use a good LED driver and a higher number of individual LED diodes that run at a lower current, thus emitting less heat and increasing the fixture’s life. Those growing in smaller spaces usually want to keep things as stealthy and discreet as possible, so you should take these things into consideration because, for example, if your fixture emits more heat then you will need to run the oscillating fans or exhaust fans at a higher speed to remove that heat, which results in more noise and sometimes more smell due to the carbon filter not being as efficient when the exhaust is running at a higher speed.

เรื่องที่เกี่ยวข้อง

How Many Autoflowers Can I Grow In A Square Meter?

6. The Best LED Grow Lights For Small Spaces

Now that you read everything you needed to know before buying your next LED fixture, you’ll be able to know exactly what you’re paying for and if it’s worth it or not; There are multiple LED fixtures that will perform really well in smaller setups, lucky for you, there’s no need to go online and search each one of them. Here’s a list of the best cost-effective LEDs for small grow spaces in the market:

As you can see in the table above, there are multiple factors that will influence your choice; Starting from price to efficiency, all of these factors should be taken into consideration in order to make the best choice but in the end, the most important thing is the efficiency because the higher the efficiency, the less money you will have to spend for each grow cycle while still getting the optimal lighting that you’re looking for despite the relatively high price point, obviously. As you may know, regular LEDs and light bulbs can also be used and will result in a really good harvest but they’re no match for most of the good-quality LEDs in the market in terms of efficiency; Also, they do not emit a full-spectrum so if you’re growing with bulbs you will have to change from a “blue” spectrum during the vegetative stage to a “red” spectrum during flowering so starting with a good full-spectrum fixture does not only save you money but also time and effort.

 In the table above you can see how much older LEDs and light bulbs consume, their efficiency, and the total usable PPF, which is nowhere near the values for more modern LEDS. Now, this doesn’t mean that you have to buy the most efficient LED you can find because it basically comes down to how much you can or want to spend but you should definitely take all of these things into consideration, this way you know you’re making a wise choice and won’t regret it once you’ve already bought your LED.

7. In Conclusion

You can definitely grow your own cannabis using any light fixture you can find or have available but if it’s time to upgrade your grow setup or you’re a new grower and just want to start with a good LED, make sure you take all of the things mentioned into consideration. The lighting is one of the main things that will allow you to grow really good flowers so it’s essential you make a wise choice!

If you have experience with any of the LEDs mentioned above or want to help fellow growers with some more information regarding LEDs, feel free to leave a comment in the comment section below!

External References

1. The best LED grow light 2021 for small spaces - Migro Lights

2. LEDs Light the Way for Indoor Farming. - Uddain, Jasim. (2021). 

3. Innovative LED Lighting. - Hinov, Nikolay & Tsankov, Plamen & Ibrishimov, Hristo. (2019).